Product Description
* Built-in high-current wiring board, high sensitivity, high-tech waterproof housing, with protective rubber bolt cover, can
protect your trolling motor from electrical damage, saving you the cost of replacing the fuse.
* Manual reset button, the red button on the circuit breaker can be used as the main disconnect switch of the circuit, and can also
be used as a kill switch.
* Current 50A 60A 80A 100A 150A 200A 250A 300A, newly designed manual reset circuit breaker, compatible with all 12, 24 volt and 48
volt systems.
*Accept 0/2/4/8 specification power cord, with adapter, wiring input (BAT) input, output (AUX) output. Install on the panel or
firewall.
* Provide protection under overload or short circuit conditions in car audio/video systems, ships, trucks, buses, ATV winches,
marine and DC sound amplifier systems.
Models | 50A/60A/80A/100A/150A/200A/250A/300A |
Voltage | DC 12V - 48V (Max) |
Operating Temperature | -32C to 82C (-25F to 180F) |
Storage Temperature | -34C to 149C (-30F to 300F) |
Power | 10W |
1. Wiring IN (BAT) incoming, OUT (AUX) outgoing.
2. No need to disassemble or install insurance core when break down. Just switch on or off the device.
3. Please order and use the Circuit Breaker with right work temperature, to avoid it is too heat and stop work.
4. Please correctly push the button to avoid damage the Circuit Breaker.
1. Circuit break protection: When the current reaches the cut-off value, the long handle automatically bounces and cuts off the power supply. Generally, it trips in a short circuit condition. After the fault is eliminated, press the long handle back to the original position to form a path.
2. Manually cut off the power: We need to disconnect the circuit when refitting, and directly press the oval red button on the insurance. At this time, the long handle automatically pops up to cut off the power. Connect as above, then press the long handle back to its original position.